This is an old router, text published in may 2014. If you want to read about a router TP-LINK most modern Click this link for the W9980 VDSL2 of TPLINK.
Always complain about my modem WiFi operator. Sometimes I complain so much that they change the modem, but turns and moves gives some defect and back those cheapie models without antenna. That's when I decided to give $ 100 and buy a good modem/router. To solve once the problems with WiFi and the connection with the ADSL2 .
The model chosen was this, the TP-LINK, It should work with any of the ADSL operators, IE, all who use telephone cable to carry internet. The WiFi it is very good and the settings are quite extensive.
There's the appliance. Inspires more confidence than the simpler than the operator even gives us.
On the front we have the traditional Leds: the four ethernet ports, one for the power, DSL, Internet, WiFi and other.
On the back we have the input for power supply, a physical on-off button, a reset button, a to turn off WiFi and WPS.
There are four Ethernet ports and one for the telephone line (ADSL2 ). There are two antennas, both removable, IE, is it possible to buy another larger antenna if you want even more range.
Attention to this USB port! Is it possible to put here a pendrive or external HD and leave as network drive, accessible to any computer, and even on the internet. This without leaving any PC server attached. You can also put a network printer or a backup 3 g internet connection. Very useful.
In the box there is also a manual, a warranty certificate and a CD. The router comes with a sticker telling you to put the CD before connecting any cable, but I connected everything and ignored the warning. Worked normally.
As soon as you turn the modem on a telephone line (RJ11) and on your computer (RJ45), in the same way that the modem from your operator, You can log on in the settings of the equipment by pointing the browser to 192.168.1.1. I changed this number to 10.1.1.1, but it's the same thing. The password and user are “Admin”. A Configuration Wizard as shown below.
One should choose for the ADSL modem connect to the internet through your carrier GVT, Velox, Speedy or TurboNet. You must then configure VPI and VCI that are different for each carrier. They're just two simple numbers, use This link If you don't know what numbers to use in your carrier.
Then go straight to the WiFi configuration. This is a router that supports standard 11. n and all the previous, until 300Mbits/s.
In this configuration below, DHCP, You can change the address of the router to other than default 192.1.1.1 (Optional).
Look at that cool. If you have one of those 3 g or 4 g modems, This router supports an additional connection to the internet if the main (cable tv) is unavailable. Not yet tested, but there are apparently supports all carriers.
Under an unusual configuration, usually not present in cheap routers. You can draw an IP to a MAC ADDRESS on the DHCP server.
There is support for DDNS server NO-IP free. In addition to the currently paid DYNDNS.
Here you can configure the internet bandwidth available to each computer. Something else unusual and extremely useful if you have many computers connected to your network.
There are several firmware updates to be downloaded on the site. I haven't done any update because I read on some forums that the new firmware is giving problem. Gotta watch!
There is an extensive system of “parental control”. You can turn off access from any machine on the internet after a certain time.
Port Forwarding works perfectly. Very common not to have this possibility in cheaper modems.
If you put a PenDrive or external HD in USB modem entry it becomes accessible via network on any PC. To access simply enter //192.168.1.1 in any Windows Explorer (Linux or MAC also work).
I really liked the modem. Worth it replace the crap that the operator gave me. The WiFi went on to get well anywhere in the House, and even a little bit there in my Play (I live on the fifth floor!).
The ADSL2 connection worked fine, falling very rarely and certainly by fault of the carrier. The internet connects and syncs faster with this modem also, Although it doesn't make much difference.
Great product, that has not been purchased in China. Bought in EBay, Although it is also possible to find this product on the website Buscapé, BoaDica or in the Google Shopping.
Other routers in DealExtreme: http://www.dx.com/pt/s/wifi router
Hello I'm a problem with mine is the same model, but the firmware is in Italian and I can not upgrade to firmware manufactures when I try to update it says that this corrupt the firmware seems that blocked. Sera that can solve this problem ? If you are some tips please help me!
Hello my dear Adriano…
1°) Here I bought a tp-link router 8968 ver.4 to use as wireless transmitting station, because have no phone line to access the ADSL.
2°) I also bought a USB 3 G MOBILIS.
3°) This key hook up to the PC market normally.
4°) I plugged into the router Tp-Link 8968 no reaction, Despite the different setting on the web page of the famous 192.168.1.1.Aucune reaction.
If Mr ADRIANO, help me, I am at his disposal for any info.
Not all 3 g USB modem dongles will work directly connected to the router. My guess is that your 3 g dongle does not work. Try to complain on your operator, Maybe they have another compatible modem.
Do you have any tips of how to configure the modem to replace the Live modem Tim (VDSL connection)??
No I have not. Never signed this Live TIM. They say it's very good.
Theoretically, the W9980 (http://www.tudovemdachina.com/modem-roteador-tp-link-n600-td-w9980-adsl12-vdsl2-dual-band-wifi/) It should work. We just have to figure out what the setting value VID, that is 600 on GVT/ALIVE.
Has been released the TP LINK TD-W9970 VSDL 2, for those interested !
It's true. I'm using the W9980 now. I did a story on him: http://www.tudovemdachina.com/modem-roteador-tp-link-n600-td-w9980-adsl12-vdsl2-dual-band-wifi/
Ricardo, you have the W9970? If Yes can you teach us how to configure it???
OLA, I have a TD-w8968 v3, I liked him very much, but have faced problems accessing the hd files from the usb port through the internet. Although the no-ip address update cant access.
do you have any suggestion?
Try to see if there are firmware update. I no longer use this modem, I can't help…
2 years of post and still yielding. Congratulations!
Do you think this model still worth or you indicate some other? The free market is around 150 freight. I saw other, but very expensive. In order, It is still a good choice?
Thank you and congratulations for the post!
Still worth it for those with ADSL2. In my case, I migrated to VDSL and I can't use the phone part of the modem. The WiFi keeps running.
Friend, I have a question. I got once a link one L1-RW434 wireless router, and despite being a great router, the radiation it is absurdly high. Remember I measured with a radiation application where I sat down to touch the PC and was 400% above the ideal. My current modem is presenting problems of instability on WIFI and need to exchange it. This modem that you quoted above has this absurdly high radiation problem? It works on connections above 10 MB and works with N = T or SKY internet?
Thank you in advance, because I'm a bit of a layman in these matters.
ABS,
This modem does not work with more than 15 MB of internet. Only the VDSL which I haven't found to buy. Don't worry about radiation in this range of frequency…
I wanted to ask you something, I have a Humax modem That doesn't allow me to play some online games for example gta v online I can't stay in session publishes with more than 3 players and, Finally I called the operator net and asked more they told me I could swap unless you pay 90 real by another modem brand, In case one of the motorola who always supplied the needs here at home, I was wondering if I can buy a modem account and install without having to talk to the net because it is obvious that they want to make buying them. It is possible to?
Can, that's what I did when I bought this router of the text. He is for GVT! Works normally for ADSL and ADSL2 and ADSL . However, If you have more than 25 m it is possible that the technology used is VDSL or any other, and in this case it won't work. I couldn't find so far in Brazil VDSL modem of TP-LINK or good manufacturer. My current modem is GVT (Yes VDSL), that is sucks.
Try calling there and threatening to cancel the service. All of a sudden they move. Another option is to search the internet for similar problems and port settings. Have to search…
Can, but you have to pay attention if the modem technology is the same. This is ADSL2 , and works in ADSL2 and ADSL also. Have companies that use VDSL. In addition, If you buy another modem they will always say no support whenever anything happens (usually their fault). I took a chance and bought this. Works very well…
Good morning!
I bought this modem Tp-link Td-w8968, but I can't configure it. I contacted my broadband provider that is HI for me help, but they said the HI does not have approved this modem and the configuration would have to be on my own. Have any tutorial step the step to first modem configuration?
Must be the VPI and VCI setting. Take a look at this: https://duvidas.terra.com.br/duvidas/3201/qual-vpi-e-vci-devo-colocar-nas-configuracoes-de-meu-modem-adsl
Good afternoon
Could you explain or indicate a more detailed tutorial for this band modem control. My internet is velox of 10 megs and to wonder about upstrean and downstream rates that should I put.
You say the network bandwidth control internal LAN? If the downstream and upstream rates of ADSL we don't stir, is defined by the provider.
Friend, you know whether all devices connected via wi-fi router, as this can see the external HD or pendrive, or cable devices also can? The reason I ask is because I intend to use this feature in my two devices of bluray, you will be connected to the router through the LAN ports. Grateful!
As far as I know, simply access the router ip to access the external HD, via WiFi or Ethernet (with wire).
I got this router problem,I have a wifi network and leave open for my clients,the problem is the following ... Some people can connect and others don't,always have to reboot the modem,I don't know what to do. On the PC connected to cable works normally. Can someone help me?
Attempts to load the factory settings…
I already did that,but the problem persists. I even updated the firmware of the router and nothing.
In this case you don't need to open doors in this router?I don't know much about these things. I don't know if it's a maximum of devices that can be connected to wifi or something giving interference on the wifi network.
I can't believe this is the maximum number of devices. But, Anyway, never connected here many people. If you suspect that, decrease the “lease time” in the DHCP settings for each 30 minutes or an hour. The default is 1440 minutes. Is a long time…
Also try changing the channel of the wifi network. Check for interference…
…I've tried to run the wizard, but he does not recognize the internet signal!! ..How do I manually configure?
Grateful
Actually, putting the Internet via wan connector should work first. Check the dhcp configuration.
Good night Adriano! …I bought a TP-Link W8968 mod, but I can't install it because my Internet is Alive whose fiber modem uses an RJ45 cable and not RJ11, even I plugging the RJ45 on the door “Lan4/Wan” He does not respond!! …is there any way??
Grateful
Strange, He should be getting another network device. Try running the wizard or configure network manually.
Hi Leonardo… on the modem via fiber does not work… in your case just use a conventional router make access via PPPoE.
Want to sell your router for me ?
Hello, I like your feedback on this modem. Also got a version 3.0, I had a bit to do some settings, as for example release ports for remote access a dvr I have. My doubt is as follows,has it occurred to you need to turn it off because of temporal energy,and when he doesn't automatically connects religo on internet, you know tell me if there's some setting to solve this?
My modem reconnect alone. My version of firwmare is 0.6.0 0.4 v 0005.0 Build 130217 Rel. 62075n. Not found anything about how to disable or enable this auto reconnect…
still uses this router? to weighing on buying a to susbstiuir of hi.
Still use this router in gvt. Should work on Hi Yes…
Can I connect the modem motorola svg1202 from the NET to the LAN port of the Tp-link Td-w8968 and have wifi only for him?
Possibly, just testing…
Guy, I bought this modem router hoping to create a more decent home network. the problem is that my net of alive is 2mega and with this model the internet falls to 500kps! is there any setting specifies to solve this problem?
I have no idea what is the problem. The network of Vivo's 3 g? Will be some incompatibility between the router and the modem 3 g? Try switching the modem on the other to see if it solves.
He works as Clent torrent? I plan to download via torrent without getting with computer connected.
With the standard firmware cannot. Maybe installing OPENWRT firmware, but never tried. There is a tutorial at this address, If it works you tell me… http://1up4dev.org/2013/09/off-topic-transforme-seu-roteador-wireless-em-um-nas-mediaserver-upnp-dlna-bittorrent-client-com-openwrt/
our BRO , I don't even know how I got here, but I really enjoyed your feedback congratulations!!! my modem is a d-link 500b generation 2. This working but I'm going to throw away, only has 2 years, but I have no access to his setup, because the manual asks for cessarpelo old IE and I'm using win7 I tried in several ways but the error always, old appliance that was purchase the no, does play out because it's working but without access to the cunfigurações, is hard to do anything on it. After what you said I'm going to buy a tp-link w8968, something else, It has support for ipv6. and I hope he will stay connected ventuinha 12:0 am, during 300 days in the year…rsrss…Hugs!! Gustavo Santos.06/06/2014
Try with a notebook via windows xp. Which the error in time to access?
All the modems lock access after a certain time, to access just press the reset button (a little hole) behind the appliance. He has no bentuinha, but don't worry too much and not have ipv6 support.
Maybe updating the Furnas
firmware…